Formulations

Oat Cosmetics logo
Leverage the sanitizing and skin nourishing benefits of our personal care products for your next formulation.Test
Trade Name INCI % w/w
Phase A    
Lipex Cocoasoft Theobroma Cacao Seed Butter, Citric Acid 25
Olive Oil Refined Olea Europaea Fruit Oil 18.8
Kristal Cocos Nucifera Oil 18
Kahlwax 2811 Oryza Sativa Bran Wax 4
Lipex Shea Butyrospermum Parkii Butter, Citric Acid 4
Sunflower Wax Double Refined E00167 Helianthus Annuus Seed Wax 4
Phase B    
Amaze Nordic Barley Hordeum Vulgare Flour 21
Oat COM Avena Sativa (Oat) Kernel Flour 5
Dermofeel Toco 70 non GMO Tocopherol, Helianthus Annuus Seed Oil 0.2

 

  1. Heat Phase A at 85° C until melted and transparent 
  2. Cool to 70°C and add Phase B
  3. Fill at 60°C into suitable containers

Directions for Use:

Warm the balm between fingers and apply gently over shaved skin, focusing on areas of intense irritation.

Trade Name INCI % w/w
Phase A    
Olive Oil Refined Olea Euopaea Fruit Oil 23.15
Sweet Almond Oil Prunus Amygdalus Amara Kernel Oil 23.15
Kristal Cocos Nucifera Oil 11.5
Surface MCTG Caprylic/Capric Trigylceride 11.5
Biochemica Tangerine Butter Hydrogenated Vegetable Oil, Prunus Amygdalus Dulcis Oil, Citrus Tangerina Peel Oil, Tocopherol 5
Murumuru Seed Butter Astrocaryum Murumuru Seed Butter 3
Sunflower Wax Double Refined E00167 Helianthus Annuus Seed Wax 3
Phase B    
Oat Silk Avena Sativa (Oat) Kernel Flour 8
Amaze Nordic Barley Hordeum Vulgare Flour 8
Oat Lipid Avena Sativa (Oat) Kernel Oil 4
Dermofeel Toco 70 non GMO Tocopherol, Helianthus Annuus Seed Oil 0.2

 

  1. Heat Phase A at 85° C until melted and transparent 
  2. Cool to 75°C and add Phase B
  3. Fill at 65°C into suitable containers and allow to set

Directions for Use:

Warm a pea-sized amount of the Cleansing Balm between fingers and gently massage into skin to transforming the balm into a lightweight oil. Once cleansed, rinse with warm water. Use daily.

Trade Name INCI % w/w
Phase A    
Deinonised Water Aqua 75.5
Sodium Hyaluronate Sodium Hyaluronate 0.05
Euxyl PE9010 Phenoxyethanol, Ethylhexylglycerin 1
Amaze Noric Barley Hordeum Vulgare (Barley) Powder 2
Phase B    
Emulium Kappa Candelilla/Jojoba/Rice Bran Polyglyceryl-3 Ester, Glyceryl Stearate, Cetearyl Alcohol, Sodium Stearoyl Lactylate 4.2
Lanette O Cetearyl Alcohol 2.5
Cetiol 868 Ethylhexylstearate 3
Dimethicone Fluid 200cst Dimethicone 0.75
Shea Butter Butyrospermum Parkii (Shea) Butter 1
Caprylic/Capric Triglyceride Caprylic/Capric Triglyceride 4.5
Oat Lipid e Avena Sativa (Oat) Kernel Oil 3
Phase C    
Sepigel 305 Polyacrylamide, C13-14 Isoparaffin, Laureth-7 0.5
Phase D    
Aurafirm N Aqua, Lactobacillus Ferment, Avena Sativa (Oat) Kernel extract, Sodium Benzoate, Potassium Sorbate 2

 

  1. Add water to the main vessel then add Phase A with stirring and heat to 70°C
  2. Mix and melt Phase B in a separate vessel and heat to 75°C then add the oil phase to the water with 5 minute homogenisation
  3. Add Phase C and homogenise for 5 minutes before cooling to below 40°C with stirring
  4. Add Phase D and stir until uniform then make to weight
  5. Stir, check pH, and adjust to 5-6 before stirring to ambient temperature

Directions for Use:

Gently dab a small amount of the Firming Eye Cream around the delicate under-eye area.

Trade Name INCI % w/w
Phase A    
Purified Water Aqua 68.85
Disodium EDTA Disodium EDTA 0.05
Glycerin Glycerin 2
Euxyl PE9010 Phenoxyenthanol, Ethylhexylglycerin 1
Keltrol CG RD Xanthan Gum 0.5
Optigel CK-XR Bentonite 4
Phase B    
Arlacel 165 Glyceryl Stearate, PEG-100 Stearate 2.5
Stearic Acid Stearic Acid 2
Cutina GMS SE40 Glyceryl Stearate SE 2
Ethylene Glycol Monostearate Ethylene Glycol Monostearate 3
Shea Butter Butyrospermum Parkii (Shea) Butter 2
Caprylic/Capric Triglyceride Caprylic/Capric Triglyceride 7
Cocoa Butter Theobroma Cacao (Cocoa) Seed Butter 1
Phase C    
Aurafirm P Aqua, Lactobacillus Ferment, Avena Sativa (Oat) Kernel Extract, Sodium Benzoate, Sorbate 2
Phase D    
Citric Acid Citric Acid q.s

 

  1. Add Purified Water into the main vessel
  2. Add and disperse Disodium EDTA, Glycerin and Euxyl with stirring, then add and disperse Keltrol and Optigel with continuous high speed stirring
  3. Commence heating to 70°C with continuous high speed stirring
  4. In a separate vessel mix and melt Phase B to 70°C
  5. Apply homogenisation and slowly add the oil phase to the aqueous phase and shear for 5-10 minutes until smooth and uniform before cooling to below 35°C using constant stirring
  6. Add Phase C with stirring
  7. Add Citric Acid to adjust to pH to 5-6 them make to weight and stir cool ambient temperature

Directions for Use:

Apply every evening to clean skin.

Trade Name INCI % w/w
Phase A    
Purified Water BP Aqua 7807
Glycerin BP Rapeseed Origin Glycerin, Aqua 5
Euxyl PE9010 Phenoxyenthanol, Ethylhexylglycerin 1
Dissolvine GL-47-S Water, Tetrasodium Glutamate Diacetate 0.1
Phase B    
Lecigel Sodium Acrylates Copolymer, Lecithin 2
Phase C    
Lipex Shea Butyrospermum Parkii (Shea) Butter, Citric Acid 4.5
Floramac-10 Ethyl Macadamiate, Tocopherol, Malic Acid 3
Lanette O Cetearyl Alcohol 2
AvenaPlex Avena Sativa (Oat) Kernel Extract 1
Daikon Seed Extract Raphanus Sativus Seed Extract. Helianthus Annuus Seed Oil, Rosmariuns Officinalis Leaf Extract 1
Heliofeel Glyceryl Stearate Citrate, Polyglyceryl-3 Stearate, Hydrogenated Lecithin, Tocopherol 1
Lipex Cocsoft Theobroma Cacao Seed Butter, Citric Acid 0.5
Dermofeel Toco 70 Tocopherol, Helianthyus Annuus Seed Oil 0.2

 

  1. Heat Phase A and C up to 70° C 
  2. Add Phase B into A under high speed stirring
  3. Add Phase C into AB under maximum stirring and maintain the stirring rate for 5-10 minutes to emulsify
  4. Cool down with continuous stirring until smooth, glossy and uniform

Directions for Use:

Gently massage a large scoop of the Recovery Butter into the skin for instant replenishment, paying special attention to extra-dry areas.

Standard Facial Serum
Trade Name INCI % w/w
Phase A    
Purified Water BP Aqua 88.95
Versene NA2 Crystals Disodium EDTA 0.05
Phase B    
Gylcerin BP Rapeseed Origin Glyercin, Aqua 3
Euxyl PE9010 Phenoxyenthanol, Ethylhexylglycerin 1
Phase C    
Sepiplus 400 Polyacrylate-13, Polyisobutene, Polysorbate 20 4
Virgin Poppy Seed Oil Papaver Somniferum Seed Oil  

 

Luxury Facial Serum*
Trade Name INCI % w/w
Phase A    
Purified Water BP Aqua 84.95
Oat SILK Avena Sativa (Oat) Kernel Flour 4
Versene NA2 Crystals Disodium EDTA 0.05
Phase B    
Glycerin BP Rapeseed Origin Gylercin, Aqua 3
Euxyl PE9010 Phenoxyenthanol, Ethylhexylglycerin 1
Phase C    
Sepiplus 400 Polyacrylate-13, Polyisobutene, Polysorbate 20 4
Virgin Poppy Seed Oil Papaver Somniferum Seed Oil 3

 

  1. Add the water into the main vessel
  2. With stirring add and disperse the Versene NA2 crystals *(and Oat SILK)
  3. Add and disperse Phase B
  4. Apply homogenisation and then add the Phase C ingredients in order
  5. Homogenise for 5 minutes until bright, shiny and uniform

Directions for Use:

To compare the serums, apply a pea-sized amount of the Standard Facial Serum to one half of the face, and the same amount to the other. In future, use the Luxury Serum daily as a mattifying base before moisturiser.

Trade Name INCI % w/w
Phase A    
Water Deionised Aqua 91.9
Sodium Hyluronate 100% Sodium Hyaluronate 0.1
Phase B    
Tegosoft PC41 Polyglyceryl-4 Caprate 3
Euxyl PE9010 Phenoxyenthanol, Ethylhexylglycerin 1
AA2G Ascorbyl Glucoside 2
Aurafirm S Aqua, LActobacillus Ferment, Avena Sativa (Oat) Kernel Extract, Sodium Benzoate, Potassium Sorbate 2

 

  1. Add the water into the main vessel
  2. Apply high speed stirring then slowly add and disperse Sodium Hyaluronate
  3.  Stir until fully dispersed and hydrated
  4. Continue stirring and add Phase B
  5. Stir until uniform
  6. Adjust to pH 5-6

Directions for Use:

Apply in skin emergencies or as part of a daily skincare routine after moisturiser.

Contact Us for More Information